All the best!
In this article, the author tells us to prepare for you to prepare a richer basket, you can’t do without it in the kitchen, this item is called a plate for processing. The original doshka is mainly used for drawing food products in the process of their preparation, otherwise we can serve as a substitute for hot frying pans, scorched, skins are crusted in our own way. The author gave a description of the entire process of preparation, which is accompanied by a report photo call.
For the preparation of a detailed board, we need:
Tool:
Drill;
- Electric jigsaw;
- drinks;
- emery paper;
- Roulette;
- Kutova line;
- Olivets.
Material:
Doshka oak;
- zahisna oliya.
So, like a board for processing, it is guilty of mitzvah and serve us for a long time, like a harvesting of a vicorous oak board. You can get this wooden material in one of the special shops. The width of the doshka, as the author has won, is 20 cm.
I will pinch those that we will need to give.
We start from the fact that it is hard to grind the surface of the board, as the wood is hard, we gain patience.
We gave an additional line to outline the future contour of the doshka.
The author virishiv vikoristati axis such a form.
We take electric jigsaws, and behind the painted contour we can see a figured detail.
Guilty vyyti approximately so.
In order for the doshka to be hung on a hook or a carnation, on the handle of the doshka, a sharp opening is drilled.
Then, it is necessary to take a drink and, for additional help, cut the edge of the board.
After filing with a file, we take emery paper with fine graininess and pass it over all surfaces, smoothing and rounding sharp edges.
If you have finished grinding the detail, take a ganchirka and wipe the board with a wooden saw.
Dali take a special oil called “Belinka”, as it is not toxic and can stick with food products, pour yoga into the container.
We take a penzel and evenly cover the dow with a thick ball of olive, let us leave the dow for a deaky hour in order for the olive to pick up.
After an hour of 15 - 20 hvilin, you can wipe the doshka with an excess of olives, for which a vicorist is a servlet.
On top of the planks, more pronounced color can be added - the texture of the wood will appear.
Dali need to deprive a doshka for doba.
After 24 years have passed, it is necessary to apply another ball of oil, allowing the wood to dry a little.
As a result of all actions, I’m ready to complete the doshka until the end.
On what, maybe, mustache. Yakscho neatly koristuvatisya with a given virob - the doshka will serve for a long time.
All thanks for respect.
- Select material
- Made from solid material: cut wood, wide plank or plywood sheet.
- Krok 1: design
- Krok 2: preparation of tools
- Krok 3: processing of wooden blanks
- Krok 4: details
- Krok 5: Zahist
- How to build a doshka from fragments
- More ideas
The obrobna doshka is guilty of buti clean that mіtsnoy. It can serve two functions: be a decorative accessory, serve as a tool for preparing food.
The creation of a kitchen board is a creative process that cannot be clearly defined by an algorithm.
What can be a board for processing products
A technical warehouse can be without toxic houses.
Groups are creaked with clamps, slatted with slats at the upper and lower planes (divine photo).
If the glue is dry, group blanks are ground and planed for additional evenness.
Hemmed the large boards on the narrow fragments allowing the workpieces to be processed on the benches. They are guided by the width of the working areas for planing.
Completed group blanks are vyrivnyuyut for tovshchina, glued, covering the sides with glue, fixing the structure with clamps.
Krok 5: polishing and residual grinding
If the glue is dry, grind the board to the required dimensions, sand the surface again. Kuti can be rounded with a milling cutter.
A small groove is visible along the perimeter of the board. There will be accumulated sіk, scho utvoryuєєtsya pіd hrіzannya produktіnі.
Krok 6: obrobka olive
Ready virib is processed with olive oil.
In a similar way, shatter a doshka from fragments, whatever the form.
More ideas
For boards, you can vikoristovuvat korchі, non-primary fragments of the wood. Some of the clear forms are unique, polishing and seepage with sour oil can be done.
At the finished board, you can cut through the opening for cutting off the cuttings, sand the cuts, attach the bottom to the board, and so on.
Dogliad
Boards from a tree absorb odors, accumulate bacteria. If nothing was found, then sanding was carried out, oozing out at least 3 times on the river. The term for the service of the doshka is increased.
The dermal, which is made from wood, has a lot of cuts. You can just wikinuti, or you can vicoristi. At this statue, we are rozpovimo, like from the cuts of different species of the tree, I will make a plate of name-bearing beauty. The key points in this project are the choice of the correct (non-toxic, water-resistant) glue and the appearance of wooden cuts of different cuts.
:
- floor saw blade
- fuguvalny verstat
- planing yard
- milling cutter with a set of cutters
- steel for router
- clamps
- glue brushes
- orbital manual grinder.
Materials:
- cuttings of wood of various species
- waterproof non-toxic wood glue
- mineral oil and ganchir'ya
For the preparation of a molded board, we vicorated scraps of maple, pea, chervonok, cherries and other species, the color and texture of which were given to us by tsikavim. If we are talking about cuttings of wood, we can use the tree itself, not glued beams, plywood and other composite materials.
Technology for the preparation of wooden planks
1. Obrobіzki wood on jointing bench. Such a trim is necessary for the boards to fit neatly together. Try, so that the height of all the boards is approximately the same, the width can be whatever.
2. Finish the front sides of the planks on a planer. So you will reach the same comradeship and take away smooth surfaces. Planks of bazhano should not be made thin, the thickness may be at least 15, but rather 18 mm.
3. Saw the planks with a flat circular saw. The minimum width of the boards is about 12 mm. Smuzhki are not guilty of but the same width, vary it on the ruling court.
4. Lay out the boards in the required order. Try to achieve a sovniy zvnіshny look, experimenting with a combination of colors and razmіrіv. The number of boards to lay down in the size of the finished board.
5. Glue the boards. Glue the bagan not all at once, but add them to the sprat group. The width of the skin group can be such, with which your planing workbench will fit. The glue can be non-toxic and moisture resistant. Apply glue with a thin ball on the side edges of the leather board, and then tighten all the details with clamps.
6. At the result, you may have a sprat of groups of boards. Finish the surface of the skin group with an orbital grinder, trying to remove all the glue. Let's make a skin group on a planing bench, knowing the thinner ball from the skin side. Now you can put the pieces of the shaped board one to one and give an intermediate assessment to your efforts.
7. Glue the pieces of the board at once, using the same technology that glued the boards together. Remember that through the great rozmіr I will not be able to work on a planer, I will have to sand it by hand. Therefore, try to glue the parts of the yakomog more precisely and rub the glue, as you step in, with a watery ganchirka. To tighten the parts, at once you need to finish the big clamps.
8. Sand the board and cut it to the required dimensions. Grinding with a manual grinder, remove the glue. Shaping the board, try to make it proportionate, so that you can wrap the top of the board out of width. So it’s best to vrahuvati rozmiri mittya, even if the dot doesn’t fit in the miyka, miti її will be problematic.
9. Round the edges of the board behind an additional milling cutter with a double cutter. Just ask the manager of the special style, direct equipment.
10. Sweep a groove around the perimeter of the doshka, as it is necessary for the shob sik, which is seen by the products when cutting, without sticking to the table. You need to cut the groove for an additional milling cutter with a double-ended rounded cutter. Sob the groove was smooth, hurry up with a plywood template. Cover the template with masking tape from three sides, and move the milling cutter on the fourth. Let's take the adhesive tape from one side and fix the one that made the groove. Fallen water in the depths of the groove can be covered with one chi kіlkom passages.
11. Sand the board. Grinding is carried out for the help of a grinding machine, changing sandpaper to finer paper, right up to No. 220.
12. Apply a safe coat. Tse mozhe buti, for example, mineral oil. Reconsider that the oil has entered the tree well, if necessary, apply a coating in the sprat of balls.
In the kitchen, a necessary tool for drawing various products is a cutting board. The back of the head was stone, then flooded, bronze, and then it became wooden). Wanting to know recently, plastic analogs appeared, a wooden board, like before, is also popular. I recently went to the kitchen to debunk the details of the boards, prote those that, after talking in any way, didn’t go with my statements about such a simple utilitarian kitchen item, on which they cut vegetables, meat and other meat.
Today, we know with you, how they are preparing the most expensive doshkas in Russia.
Just like a theater is built from hangers, so is a masonry, de-robbing wooden wool, starting from a warehouse, de-laying a tree. Before our maister, about the work of such a modern day, there is a ready-made look, dried at a singing temperature, a sprat of rock. It is not possible to make a fresh tree of victorious wood for making boards;
Here in the warehouse there is a singing temperature regime and moisture again, so as not to let the wood dry out and become watery. On this table, hanging on the wall of the main, you can see the optimal moisture content at different temperatures.
There is also a hygrometer hanging here, which shows the degree of moisture in the place. True, the master said that there could be wrong information).
For the preparation of such boards, with a particularly foldable little one, it is necessary to make a verstat from the state of emergency (for example, program management). Verstat is small, enough to plug in a new laptop from behind a given program.
A little doshka, above which a cutter is worked at once, inspired by the creation of Maurits Yesher "Reptiles".
For a cutter, we work wonders).
This is how the board looks like after the work of the verst. If you are respectfully surprised, then say that this possible board is glued together with pieces. Why is it so shattered we know far away.
Just as the base of the board is made of mountain, then the inserts are made of other types of wood, which are inspired by the texture and color - oak and rosewood.
As the master said to me, the layout of the figures on the boards with such a rosary, that when inserting other figures of reptiles, no gaps appear. The figurines seem to fit one to one tightly.
On this photo, you can apply the glue. Different colors of gluing from different varieties of wood. From such material, one of the most folded boards in the prepared boards will be glued. For example, fasting can help you її.
The master takes a simple board, refines it, sharpens the edges. Then the doshka cuts into parts, as they turn with the end part and stick together. Moreover, gluing should not be done in a sufficient order, but in a special order, so that the river rings were straightened in the opposite side, which would be better for the boards in the form of deformation when the moisture was changed.
Why bother? Through the vertical spreading of the fibers of the wood, the knives should not be blunted, so the blade of the knife is no less than the fiber, like in great boards, and penetrating between them - forging. The fibers are rotated at the exit camp after the culinary trouble on it. Evidently, the doshka does not falter, and the cooks do not have to sharpen their knives once for a change, like a vapadka with great dowels.
Like the material of the Crimea, mountain, hornbeam, ash, maple, oak and beech are also vicarious woods, like American cherry, moving, red wood. Yak bachite from marking on the tree won from the USA, from Pivdennoy America and Africa.
Other varieties of wood.
After that, as the wood is cut into pieces and turned upside down by the end part of the hill, they are glued and squeezed at the clamps - to a special press. Yak bachite, here shield the various comrades. The one that will become a board again, and the shields will be thinner for drawing vizerunks and figures on the surface of future boards, similar to the figures from "Reptiles". The shield after gluing will be ready in a year, it is recommended to prote navantage after 24 years.
For gluing the vicorist, special adhesive formaldehyde is used, which cannot be stored in its warehouse, permits for contact with it and may have great water resistance.
This is how the application looks, de є all necessary tools for carpentry.
Cleanliness and order is perfect! As you could remember, the master has all the typesetting tools for the preparation of any kind of wooden mold. Spravzhnіy paradise carpenter).
Special clamps for planks of great size.
That doshka with reptiles is not yet clear, the robot will be carried out on it for more than one year, it will be possible to do so later. After that, like it’s glued, you need to run it through the versat for grinding - a thicknesser. In fact, this is a modern planer.
Then the sidewalls of the board are cut with a circular file.
The sides are polished on the other side with a vertical run of the line. Here the kuti are rounded off.
Then the doshka again runs through the drum grinding bench.
This time the surfaces are polished more delicately. However, that's not all.
A pump was added to the skin lining, to collect the thyrsus from the woods of the village. After finishing with verstats, it is polished with a manual grinder. I first beat the coarse sandpaper with a grain size of 120 units, then 240 units in order to residually polish the board
Leave the strokes to round the edges, and you can say that the carpentry work on the board is finished.
After all the surgeries, the doshka takes a bath with mineral oil, and does not have any relish, no color, no smell. Oliya is prepared for oil, the proteo is absolutely safe, and you can get stuck in the cosmetic industry.
That same dosk with reptiles, as shown on the cob post, pretend to be the same. After one hour, if the oil seeps out, let it dry, then again grind with hot mineral oil and wax in proportion 4/1.
At the same bath with olives, other dobs break.
And now let's go to the "Show Room" of elite boards). At this kіmnatі, the doshkas are packed and checked on the zestrich zі their future master.
Hygrometers follow the water level.
Tsya doshka just opened my template about simple utilitarian kitchen filling! I can’t tell you how you can venture to make products on the creation of art).
Bulo stained richly godin, to prepare a board with a 3D effect. To the speech, tsі doshki najdorochі, і zrozumіlo why.
And you can boldly hang up the picture for this doshka!
Meister prepares special boards for beating meat. Here you need to put forward grooves for draining blood.
I will also add that the end plates through the material and the special features of the viability appear to be very important, then they do not roll around the table/working surface of the kitchen. It is not necessary to put a ganchirka or a servlet/towel, trim with a risik. The pads are equipped with dodatkovo humic (either silicone or plastic) bottoms, yakі є insurance vіd vbirannya vodka, scho vpadkovo drank pіd doshku.
After that, as the doshka has gone through all the stages of the brewing process, it will be packed at the spit.
Trochy hot again and everything is ready.
On this card it is indicated where the tiles were placed - most importantly Russia, Europe, the USA, and also Japan and Australia.
Well, for those who want to work with their hands on the end plate with their hands - master class. If you have all the tools and typesetting shown more, then go for it!
And as a bonus, take a look at the video, how to smash dobs with little ones, just class!
If you have a choice or a service, about if you want to tell our readers, write write me - Aslan ( [email protected] ) and we have a better report, which is not less than a hitch to the reader, but to the site Yak tse zrobleno
Subscribe also to our groups in facebook, vkontakte,classmates i in google+plus, de vikladatimuyutsya naytsіkavіshe іz spіlnoti, plus materials, such as there is not here that video about those, like the power of speech in our world.
Press on the icon and subscribe!
So, otherwise, at the skin, who works with a tree, for an hour there is a lot of different cuts of a tree of different kinds.
Obviously, you can just throw them in the bucket for a wipe, but I will tell you to work from them, and I will make a beautiful plate with my own hands. Krіm its practical value won't make you happy with its callous look and bring satisfaction in the form of speech shattered by your own hands.
The main points when making a finished board with your own hands are the presence of wooden trimmings of wood of various species and types and preparation and gluing.
For the preparation of self-confidence, I vikoristovuvav such tools:
- Floor circular saw (for splitting trees into swarms);
- Fuguvalny and planer typeset;
- Frazier;
- Shvidkozatisknі clamps;
- Orbital grinder;
- Penzlik for glue.
From the materials I needed the following:
- Trimming of a tree of different breeds and species;
- Joiner's glue (obov'yazkovo waterproof and non-toxic - adzhe on tsіy doshtsі mi obroblyatime products);
- Mineral oil and ganchir for polishing.
In order to prepare a plate with my own hands, I vikoristav cuts of cherry, maple, peas and other species, the texture of that type of such I have seen tsikavim.
Then I proceeded to the cutting of trees on the jointing bench. This is necessary for the stench to easily stick between oneself. As a result of the processing, it is necessary to achieve that the boards are approximately the same height, the width at which you can be whatever.
After that, I finished the front sides of the boards with a vicorist and planed verstat. Zavdyaki tsomu all the wood looked like the same comradeship and with a smooth surface. It is not necessary to work them too thin, not less than a second centimeter, optimally 18-20 mm.
I prepared the boards by sawing the bridle for the help of a circular saw blade. Smuzhki are not obov'yazkovo work of one width, you can vary it on vlasnyy relish.
Having finished all the work of sawing, I opened the smugs in the required order. You can let your fantasies run wild, you can achieve an unimaginable splendid look, experimenting with quilts, expansion and expansion. Fallow in the rozmіru obrobnoї boards fallow number of boards.
Then it will be necessary to glue them together, with whom it will be better, so you don’t glue them all at once, but divide them into sprat groups. It is necessary to choose the width so that the trimmed plank is included to the planing verst.
The shoe glue can be non-toxic and waterproof. It is necessary to apply it on the biceps of the skin fold with a thin ball, and then tighten the details with swivel clamps.
I have two doshkas. On top of the skin of them, I finished with an orbital, to remove excess glue from the surface. Then I trimmed the leather from them on a planer for cutting a flat surface.
Glue the parts that came together, just like you glued the wives together. Through the great rosemary, the board, which was gone, now cannot be made on a planer bench, it will be necessary to grind it by hand. Bazhano glue the halves of the yakomoga more precisely.
I glued the halves between myself with an orbital, after which I proceeded to cut the board. I’m shaping the board, I’m trying to build it proportionally (selecting a dozhina that goes from the width of the board). It is also necessary to think about those, so that the prepared board was placed in the shell of the chimney, otherwise it would be unhandy.
Then I rounded the edges with a round cutter. It’s too easy to lighten the milling steel with straight lines, but the manual milling cutter also stops, just take more than an hour.
Along the perimeter, I cut a groove, it is necessary to ensure that, when cutting different products, they do not stick on the steel. Sob the groove was smooth, I made a template from plywood, which I fixed for help masking tape on three sides. Having cut the groove on one side, remove the adhesive tape from one side, and seal that one, as you have already done it. And so muster the sides.
The groove does not need to be worked even deep, so that it will be easy to clean, one or two passes of the milling cutter are enough.
The rest of the sanding of the finished board with my own hands I carried out with an emery paper 80, 100, 120 and 220 grit (units of grit), after the skin treatment I changed the paper to a finer one (80 to 220).
In order to make a plate with your own hands, it was not deformed through a large amount of water, and it was necessary to cover it with mineral oil. It is necessary to reconsider that the oil is well absorbed into the tree, if necessary, apply the 2nd ball.
Axis of another sprat photo of the finished board:
