On some kind of insulation, you can glue tapestries. Yakiy insulator for walls vikoristovuvaty pіd trellis

27.08.2022

From old, long ago, the walls of various applications are pasted over with roll-type coatings on paper and polymer bases. A year later, a fundamentally new variety of decorative building materials has appeared on the market - heat-insulating trellises.

In this article, we will tell you about those, which are the advantages of these trellises in the case of equal sizable coverings and about those, which are the peculiarities of their gluing.

Improvement of aesthetics and practicality

Cork lining - can be vikoristan as a decorative cover

All traditional trellises, with a few rare and tension modifications, serve as a decorative function. Tobto, the stench is recognized for the fact that the host was beautiful and, as a last thing, calm. At this hour, in order with traditional materials, trellises will be installed, buildings will reduce the thermal conductivity of the walls at your booth.

Building conservation is warmly reached for the rahunok of a special lining, without intermediary, the main canvas is fastened with this or that other image or ornament. The installation of these covers is a little disturbing. Tim is not less, especially if they are presented to the surface of the base and the glue warehouse, on which the installation will be carried out.

Choosing heat-insulating trellises for your house or apartment, it is necessary to understand that heat-saving transfer is necessary for a complex approach.
A special wall to ensure efficient heat saving at the bottom of the scorched, sash window window of the doors.

Characteristics of lining

To make the walls less heat-conductive and to protect on the scorched premises, you will be helped by the thermal insulation under the trellis. Lining with a thin ball of cork, backed with polyethylene or polystyrene. For greater adhesion, the material is prepared with one-sided or two-sided paper lamination.

On the market, heat insulation is represented by such trademarks: PenoHome NomaTherm and Polif. The price of 1 meter is warehousing from 100 to 150 meters. Coating is realized in rolls of 5-7 m.

Zastosuvannya synthetic thermal insulation lining allows:

reduce the thermal conductivity of walls(effect of overlapping with the effect of stowing mineral wool or foam polystyrene 2 see);
check for small reliefs on the walls;
zapobіgti utvennu tsvili for rahunok instead of antiseptic additives;
reduce the noise that penetrates the reception area.

Important: For maximum efficiency, the inner lining of the walls is dubbed with the same heat-insulating lining.
Only in this way it is possible to spare the cold walls from freezing and freezing to condensate.

Features of the installation work

In the photo - rollers for rolling tapestries at important places

Gluing thermally insulated trellises with your own hands is not as easy as it can be.

To carry out maintenance work, we need the following materials and tools:

heat-insulating lining (you can read about those how to properly freeze the covering for gluing walls, you can read at the official statistics on our portal);
glue for important tapestries (on smooth walls dotsilno zastosovuvat warehouse type PVA, Rіdkі tsvyakhi or Framing glue);
Primer of shallow penetration for walls;
vir_vnyuyuchi warehousing v_dpov_dno to the type of surface walls;
spatulas wide and narrow;
trowel (trowel);
roller for pressing the insulating sheet;
wide flat brush;
wide masking tape;
roulette, kosinets and olives.

Surface preparation

At the first stage, I prepare the surface of the walls. The main advantage, as it is presented to the core, is the smoothness and smoothness. Therefore, the lining should be glued without intermediary after removing the old tapestries, it is necessary to remove excess glue, sand the surface and prime.

If the installation is carried out on unbroken cement plaster, or on an uneven surface, it is possible to apply a primer ball on the back, and after a complete hanging, apply a putty.

Putty for walls is applied with a wide spatula, and smoothed out with a trowel. In addition, like a ball of putty when dry, it is necessary to grind, saw and cover with one or two balls of primer. You can proceed to installation after a complete hanging of the ground (in the middle 2-3 dobi).

Important: After the preparation of the wall, cover it with special bactericidal measures, which will prevent the appearance of mold.

Material preparation and gluing

In the photo - gluing a smuga thermal insulation to the base

At this stage, we vimiryuєmo the height of the walls and lay the lining on the smog of the necessary size. Smugi is laid down for a couple of years on a pidlog with this rozrahunk, so that the stench under his vaga straightened up. Glue is applied on the inner side of the smuga, visible by stretching that hour, which is indicated in the instructions of the picker, and it is glued to the wall.

On top of the traditional trellises, there is a lining of a torso, and to that, the guts will grow out of the vide only from the humic roller. After that, as the entire surface was rolled with a roller, the sticks are glued along the line with masking tape.

At the foot of the stele, the canvas is cut with a knife under a wide spatula. On the kuts, the lining is not bent, but it is cut so that the line of cutting passed the line of the kuta.

How to glue the trellis on the lining

For the cob, it is significant that, as a heat-insulating coating is pasted on the wall, then on top of them it is possible to put all the trellises on top of them, shards of paper thin coating can sometimes appear on the sticks.

Since the thermal insulation is characterized by the apparent surface, which is laminated, the gluing of the trellises is made in a special way from the application of a special glue recommended by the manufacturer of these materials.

Important: For maximum durability of the finished result, the trellis stick and lining stick are not to blame.

Visnovok

Now you know what is the instruction for gluing warm tapestries. Zrozumilo, such wall cladding allows to increase the energy efficiency of the premises, but it is possible to achieve a real effect only for a comprehensive approach before carrying out the refurbishment work.

When planning to insulate your booth for additional warm trellises, ask about the insulation of the walls, as well as about the sealing of windows and doors.

During the development of the design of our apartment, we mainly focus on decorative warehouses, and we need to take care of technical issues during the repair itself. For example, create a comfortable environment for living in all kіmnats.

Packing budіvelny material for insulation

Insulation and yogo see

To create a comfortable microclimate, it is necessary to insulate the walls. For whom it is necessary for us to attach and mount an insulator on them. There is nothing foldable in these robots, you can easily fit on your own, before that, on sites in the Internet, there are anonymous different instructions for installation for whatever taste.

When choosing methods of insulation, you want to save the dimensions of the room as much as possible. Expensive space we still need for glazing, so we don’t need to build large-sized structures for insulation. Otzhe, in the wake of the life of plasterboard walls in the middle of the place, we are clearly seen.

Irrespective of those that this method allows to vir_vnyati st_ni and dodatkovo insulate їх, vin is also labor-intensive and vmagaє a large number of different materials. It would be very logical to use such a method of basic insulation for a private booth.

Laying under the espalier brand Ekohit

We also need to choose the most narrow, superior material, even more importantly, so that it insulates as well as it does its functions and does not harm the health of the people who live.

Variantiv, yakі proponuє budіvelniy rynok, dosit rich. However, they can be easily divided into two main groups:

Plastering made by heat-insulating authorities.
Insulation under the trellis, winding at the roll.

Let's take a look at the report on the available options, their advantages and shortcomings.

Plaster

At budіvelnih shops there is a special plaster for insulation. Subtleties and nuances of the material and work with it are given to sellers, you can consult with them, choose the best option for your needs.

Best, if you approximately show, what result can be found in the final bag. Todi you will not be nedbalo put up to zasobіv yogo reach. Before that, not everyone can plaster the walls, and you have conceived independently of the work, you are to know the full data about the materials and the work with them.

Navit still trust the plastering robots to professionals, varto is respectfully placed before the choice of heat insulation, so that this functionality will be put on long-term, and not on a sprat of rock.

What kind of thermo-insulating plaster is necessary, to show you, to lie down everything in the light of power, that ostentatiousness. The only place where all kinds of plastering insulation, their ecological warehouses, the stench is absolutely harmless for people and creatures.

Zapovnyuvach for plaster on the basis of pinoskla

Among the most popular reminders you can see:

Tirsa, powerful to the found and simple look of natural plaster, which insulates. As if it were other natural materials, tyrsus is bad to endure for a Vologda, then in Syria (in a private donkey, on a loggia) this type of insulating plaster is not suitable.
Pіnopolіstyrol vіdnositsya to modern materials with vіdmіnmi teploіizoljatsiynimi and zvukоіzolіatsiynimi characteristics. Apply such plaster on the walls and the noise of the navkolishny middle will disappear behind the window. A small amount of styrofoam is worthy of high flammability, before that, when the fire is high, it is seen that it is toxic for people.
Do not marvel at their wondrous names, perlite and vermiculite are eco-friendly mineral reminiscences, which can make the harp resistant to various splashes, non-combustible, safe for people. A small amount of this is important for the great step of the vlogannnaya vologi, to that after the plastering of the walls of theirs, it must be additionally insulated from the inflows of the vlog.
Another current material is pinosklo. The riven of this thermal insulation is not the most important, then the material is absolutely non-combustible, it can be miraculous indicators of moisture resistance, creations from environmentally friendly materials.

It is significant that with victorious plasters with mineral fillings, the surface of the walls will be porous and short, so before gluing the tapestries, additionally plaster with finishing putty.

And the axis with victorious rolled insulators does not need such manipulations.

Roll option

As you remember, earlier, before gluing the outer decorative trellises, the walls were pasted over with great newspapers. At old budinkas, you can wind a sprinkling of shreds of such newspapers. At that time, tse buv vіdminny insulator and virivnyuvach for walls.

Standard roll of insulation pvm

But those hours have long passed, new materials have appeared, the technology of manufacturing them has gone far ahead. Now the insulation under the trellis is sold in ready-made form, in rolls, and splintered wines from various materials:

Pіnopolystyrene can be used not only as a heat-insulating plaster, but can be sold in sheets as a lining for a trellis. At the same time, all its functionality is saved by such a looker. It is easy to glue it to the wall, it is necessary to use good glue, best for important canvases, and at the same time add to the warehouse a little bit of finishing putty, ground on the basis of gypsum. The foam polystyrene lining is single-ball, and up to it from one side of the papyrus glues like another ball. To fight for the relief of gluing the tapestries, and even on the material of the stench to glue it is superbly filthy.
Pіnopolyethylene back type for bagatma characteristics overturn the lining described above. On this day, the most popular insulating trellis. We let out different kinds of sorcerers, you can see from different brands, (often ranks among the people of Poliform). Roll insulation made of pino-polyethylene glued on both sides with paper. Try to make it easier to stick the heat insulator itself on the wall, and then the trellis on the new one.
Cork is one of the most popular insulators, moreover, it is not natural. The material has good heat-insulating characteristics, badly transmits sound, and it looks quite nice. Yogo, with a great bazhan, you can wink as a finishing touch. The most important nedolіk - weak moisture content, nivelyuєtsya for rahunok cork lining with special water-dwelling warehouses on the basis of wax.
Tapestries with a heat insulator applied can be used solo. In their structures, as an insulator, you can use foil, elements of a curved spunbond material, and different types of glue material. It’s a pity, it’s hard to know such options for trellises, but it’s easier to choose the best way. Prote zastosuvannya such materials for ozdoblennya stіn suttєvo save an hour of repair work and easing a lot of processes.

You can choose your own, whether it be from refurbished more than roll insulation, and you will know exactly what will help you to repair the walls, insulate them, add a room, in such weathers of vapor barrier.

Until then, the term of applicability of materials is counted in dozens of years, and then, it is not necessary to change them every hour for gluing new tapestries. Deyakі vidi pіdkladok easily znіmayutsya zі stіni for repeated wokrystannya.

Wall mounting

Irrespective of those that the roll insulation is made from different materials, mount yoga on the wall according to the standard principle. All vіdmіnnostі polyagatimut at the warehouse with glue, which will be vikoristany, and, vіdpovіdno, at the hour hanging lining on the wall.

Clean up the installation work from the lining at the site

For gluing the insulation on the walls of the apartment, you need to work like this:

Before the varto prepare the surface, for which it is necessary to take out the old trellises, plaster the wall, smoothing and lighting up the great cracks and unevenness. Small defects and surface walls can be covered, the stench will stink.
Dali the surface of the wall needs to be primed. Rush for additional glue, as we will glue the lining, bred in a more weak consistency, or for an additional special warehouse for priming. After the primer, it is necessary to pokat until it climbs up against the wall and dry.
Rolled insulation is recommended to be laid on the pieces of the necessary longevity, so that the wine can lie down and lie down. Tse significant peace to make it easier for us yoga sticking. When cutting the canvas, add a little to the material for insurance.
The glue warehouse is ready to go with the instructions for yoga packs. If it is possible to the right with a lining with an upper ball from a paper, then we apply glue on the wall and on the threads of the thread, with which we let it seep literally 5 quills in the warehouse. Yakshcho lining is equipped with non-woven edges, it is enough to smear the wall, and the material is easy to attach to it.

Dali passable without interruption to the installation of canvases on the wall. This process predicts the gluing of the tapestries, the pieces are glued into a stick and are resolutely smoothed out. Z-pіd linen vyganyaєtsya povіtrya and there mіtsno stick to the wall. Manually beat the humovy roller, create the necessary vice and do not mess up the insulation sheet.
After that, as the insulation is dry, after about 1-3 finishes, we glue the sticks of the canvases with the greatest masking tape. Crepe allow us to give the monolithic nature of our design.
Now our walls are well insulated, and you can proceed directly to gluing the tapestries.

Wall insulation allows us to create the most comfortable wash for living. Vіn serve us three times a day, how long does not sag the trellises every day.

Just before the hour of the opaluval season, the temperature in the rooms is trimmed at +18 to 22 °C, which means that it is necessary to take a breath of heat through thin walls. To fight in two ways: to isolate the sounds in the middle. Another way to go, as the temperature on the street fell to +5 °C. For whom it is not obov'yazkovo to spend the area of \u200b\u200bthe inner space, the shards are a thin insulator under the trellis.

Yogo mounting is easy for 1-2 individuals. This way of internal insulation allows you to save up to 15% energy and raise the temperature in the room by 2-3 °C. Behind the vіdgukami warming under the trellis vdvіchі effektivnіshe for nastіnі kilimi, yakі have long been out of fashion. It creates a feeling of calm and comfort through those that are in the walls, especially under the windows, the cold does not come out anymore.

You see, their advances are not enough

1. Rolled insulation under gluing with trellises protects not only from the cold, but from the noise, it’s simple, practical, just like a trellis. Vin can be prepared from:

pinopolistyrene;
backed pinopolyethylene;
plugs (may be released from visible plates).

2. Heat-insulating plaster with a cement-food mix with included porous particles: tirsi, expanded polystyrene, perlite, pinoskla. However, this insulation can be laid under the trellis only as a supplementary material, so as to insulate the authorities to act in front of the front. In addition, if you want to see the work with him, the shards can destroy the technology of yogo mixing, or the laying of the trellis simply does not trim on the wall.

Inspection of insulation for walls and trellises

The parameters of virobiv for home vikoristannya are approximately the same: 0.5x14 m; Tim, for whom soundproofing is especially relevant, should pay attention to the lining of the back of the polyethylene foam. The biggest vіdomy virobnik, scho yogo releases - polіform. The technical characteristics of this thin insulation under the trellis are:

thickness - 30 kg/m3;
noise reduction rate - 22 dB;
pressure for opening - 18 MPa;
thermal conductivity - 0.039 W/mK.

Another special feature is the unparalleled strength of the montage, as the two sides of paper are pasted over. Zavdyaks to whom are safe even if they are fixed from the surface of the wall. You can buy Poliformi pid trellis at 880 rubles per roll, in a 14 m line or 7 m2. The EcoHeat virobnik has a good brightness. Yogo parameters are taken from the front mark. The wine is also not strong enough to water, fungi, bacteria, glued with paper, not the same type of base, only the white color of the wine. The price of the lining for the trellis of the company is 900-1000 rubles.

Polyzol can be placed in the same row with the front marks. For the technical characteristics of the wines of the antrohi, the polyform is not accepted. The description of the insulation, recognized for sticking on a new trellis, includes the vіdmіnna proposition of the virobnik - sheets with a tovshchina of 8 mm. The stinks are 30% more likely to protect against noise and cold, and also allow you to repair walls without installing a frame.

Ibercork cork insulation is brought up to the okremo category. Vіn vіdrіznyаєtsya ekologichestyu, oskіlki natural. Vіn is light and mіtsny, maє garnu teploіzoljatsіyu and protect from loud sounds. The lining of the cork is not obov'yazkovo curled - it looks like it's done aesthetically. Virobnik promotes a wide range of textures in a range of traditional color schemes. The price of a cork insulation for a trellis for 10 m2 should be 850 to 3000 rubles.

Yak revert

If there are no repair works, then it’s better for homemade vikoristannya to bathe insulating materials with a paper surface: it will be easier to glue tapestries to them, and the stinks themselves will be good trimmed.

If the bags are scalable to allergies, the next thing to try is the test.

Under the trellis, glue a thin polystyrene foam insulation lighter than a wide one, but make sure that the edge is better in the slopes, so the walls do not require winding, the heat wind is not significant and the air is not too noisy. Varto also, when choosing lining, vrakhovuvaty and color of trellises: as if the stench is light, pastel, it is necessary to bathe white insulation. First, on the other hand, under dark leaves, you can take materials of any color, to the point of speech, for the cost of money. If the gray insulation is roztashovuetsya under the tapestries of a light color, you will see a good breeze.

How to properly insulate an apartment with your own hands

In order to attach the material to the wall, it is necessary to prepare the surface: clean the old trellises, plaster shmatkov, which are being valued. Mustaches and unevenness, which are settled as a result of this procedure, must be removed for additional putty. For the defense of the walls, the next step is to apply a primer on them and make sure that they are fully hung. Further, the technology of gluing insulation is prepared for the same scheme, which is the trellis:

according to the instructions on the package, glue is prepared for important tapestries (for cork and wide sheets - with additional gypsum putty);
rozkochuєtsya on pіdlozі, vіdmіryаєєі і razrіzaєtsya material that insulates;
glue is applied to the wall and on the preparation of the sheets;
until the wine is dry, smugs are carefully applied to the surface strictly vertically (you can turn it over with a hand) and squeeze for the help of a dry roller.

In this way, the roll insulation under the trellis is glued on all surfaces. It is important to note that gaps were not established between the sheets in the robotic process. For whom it is better to put trochs one on one. Zayv_ d_lyanki z_zayutsya with a painting knife. Ring out, such moments blame, as if the words are not equal. After completion, it is necessary to let the insulation dry again. After 72 years, the tapestries can be glued.

If you don’t take heat from your booth, and the reason is too thin, or if the thermal insulation of the wall is allowed, then the problem will be solved by adding insulation for the walls in the middle of the trellis. This zastosuvannya significantly reduces heat loss and increases the level of comfort in the accommodation.

The most optimal way of internal insulation, if you want to save the volume of accommodation. Even if everything else, which can be used on the uvazі pristrіy frame and vikoristannya slab or fibrous heat-insulating materials, terrify us to put up with it, so that the area of the stone will become significantly less for the rahun of their comrades.

See the insulation under the trellis

Strictly seeming, there are two main types of insulating materials, which are used for sticking trellises on them. Tse heat-insulating plaster and roll insulation for walls and trellises.

Wanting the same gypsum board to have the same heat-insulating function and serve as a miraculous basis for a distant decorative improvement. But for this installation, a necessary attachment to the frame, such as "z'їdaє" corisnu area, we don't say anything about it.

Thermal insulation plaster

Vaughn buvaє different types of fallow vіd povnyuvacha, scho enter to її warehouse, which and signifies the heat and sound insulation power of the plaster, as well as її flammability, vapor permeability and other performance characteristics.

Cork lining. Natural, environmentally friendly material, which is considered one of the best insulating materials not only for walls, but also for other structures (div. also article). You can win as a finishing touch. Cork insulated trellises with wax seepages are to be used for finishing walls in watery areas.

Insulation from cork is released like in rolls, so it looks like slabs of 3-5 mm.

Prepared trellises for wall insulation. Є rich self-adhesive material with aluminum foil, non-woven fiber, spunbond and glue-type tapestries.

In addition to the fact that these materials serve for thermal insulation, the stench also counts for more important functions. In addition, sound and vapor barrier, and navіt virіvnyuvannya walls. Obviously, the great cracks and cracks of the stink cannot be masked;

Prior to the transfer of rolled insulation, you can also see those that the tapestries on them can be glued bagatorazovo.

Installation of roll insulation

Independently in view of the insulation, it is installed in the same way.

Airless glue storage that hour їх hanging.

To remove the walls from all the old renovations, to lay cracks and vibra- tions with a mounting stump or a plaster bag.
Prime the surface.
Get a rolled insulator for the windrows of the needed house.
Prepare the glue, as instructed, and apply it on the wall.
Glue the insulation, ironing it to the animal from the bottom to the sides, like a trellis. Susidni smugi stick to stick.

Glue the seams with a painter's line or paper tape.

The glued insulation needs to be allowed to dry for 24-72 years (subject to the recommendation of the picker). After what you can proceed to decorative ozdoblennya.

Visnovok

The thermal insulation lining under the trellis allows you to create a calm atmosphere and a comfortable temperature in the apartment. The price of this method of insulation is significantly lower, and the speed of the insulation is lower, with the use of standard methods of adding to the frame, filling it with traditional heat-insulating materials and cladding.

In the video presented in this article, you will find additional information on this topic.

Important to the zavdannya, as it turns out in the process of repair work, it is necessary to heat the walls of the apartment or a private booth. With the method of keeping the temperature comfortable, the sound of the water, the safety of the sound insulation, as well as the planning of the surface, the heat insulation under the rolled trellis, the warnings about the yak, confirm the high efficiency. Pasting the walls with an insulating dodatkovo spray to improve the service life of the fine coating. We focus on various types of heat-insulating materials, installation features and economic aspects.

Insulation for walls under trellis - possible options

For insulation of internal surfaces, used for gluing tapestries, vicorous materials, which can increase heat-insulating power. Special linings do not only improve the comfortable temperature in the room, but also increase the low additional functions:

fix defects and minor irregularities in the treated surfaces that are insulated;
superbly soundproof residential premises, softening the penetration of third-party noises;
make it difficult for the condensation of water, which calls out the water and sprays the creation of the splash.

Thermal insulation materials, which are the basis of finishing decoration, can be mentally classified in the following order:

rolled thermal insulation;
special lining "Polifom";
cork lining.

Taking a decision on how to install a specific insulation, it is necessary to insure such factors:

vitrati on yoga pridbannya;
thermal protection of power;
mozhlivist independent stickers.

Let's take a look at the operational characteristics and power of the most wide-ranging types of insulation, which are victorious for cleanliness.

Insulation pid trellis rolled

Proponovanie in rolls of heat-insulating materials and covered with a lining of thin expanded polystyrene, which is easy to stick. I am carrying the basis of the foam polystyrene heat protection to vikoristovuєtsya:

thin foil. The foil base effectively keeps the temperature in the host, keeping warm;
paper May promote adhesion and may roztashovuvatisya from two sides of the polystyrene foam ball;
cardboard. The material is superbly glued to the surface for the help of standard methods for gluing.

Sticking of polystyrene foam insulation is carried out by such warehouses:

glue, suitable for fixing important tapestries;
plaster mix based on fine-grained gypsum;
special types of budding glue bags.

Gluing the trellises on the pinopolistyrene base is carried out with the help of a special cement glue on a polymer base.

The features of this type of lining are:

efficiency of thermal insulation;
superficiality of reinforcement;
durability to increased moisture;
vіdmіnny shumovy zakhist;
poglanannya vibrations;
zabіgannya utovennya tsvili.

The roll of thermal insulation is handy in robots and it is easy to stick to the foundation on your own.

Thermal insulation under the trellis brand "Polifom"

Insulation on the basis of backed polyethylene, known as "Polifom", close behind the structure to important views of the trellis. Consists of advancing balls:

heat-insulating lining with pino-polyethylene, which has a porous structure, full of covered bulbs;
paper zakhistu, ruffled on both sides of the insulation and easier gluing of the insulation.

With a yakіsny gluing pіnopolyethylene (“Polіfom”), which has a thickness of 5 mm, there are superficial irregularities and small protrusions on the surface.

Advantages of "Polifoma":

high coefficient of connection with different types of bases;
ease of independent gluing to walls;
supply of necessary supplies at the stationing of special adhesive warehouses;
coefficient of thermal conductivity, to become more than 0.04 W/mK;
handy for vikonannya robots and reaming the material in rolls - 0.5x14 meters.

"Polyfom" is glued to the front prepared surface. After three dobi, after the residual hanging of the glue, you can work on gluing the tapestries.

Cork insulation under trellis

For the capacity to ensure the flatness of the walls, do not forget the weight of the lining, made from cork wood. Vaughn maє complex perevag:

insane ecology;
miraculous thermal insulation;
promotion of soundproofing;
privablivy zovnіshnіy looking.

The original texture of the insulating material allows you to put it on as a decorative lining when applying it.

Insufficiencies of the cortical lining:

susceptibility to the infusion of water, which is easily absorbed by the way of seepage of water-based sumish, including those based on wax;
the need to select special glue bags. For easier fixation, the side of the material, which is in contact with the wall, is leaked by a special warehouse;
the appearance of deep marks on the front surface with mechanical inflow or inaccurate gluing of the cortical base.

The minimum area for a roll made of cork base allows heat insulation of 5 square meters of wall.

How to glue insulation on the wall with your own hands